Aerospace Chemical Consumables

Ardrox® 1873A is used diluted with water at a concentration of 20 % to 25 % by volume in water. The operating temperature is 80 °C – 85 °C (176 °F – 185 °F). Parts should be free from oil and carbonaceous deposits.

Chemetall Ardrox® water displacing corrosion inhibitor forms almost tack-free, waxy film, which easily penetrates to provide excellent corrosion inhibiting characteristics. This liquid inhibitor is light brown in color. It allows for easy application by dipping, brushing or spraying. This hydrocarbon-like odored inhibitor has a coverage capacity of 17 square meters per liter. It has boiling temperature range of 155 to 200 degrees C. The corrosion inhibitor has a flash point of 46 degrees C, making it safe for use. It can be stored at temperature range of 40 to 85 degrees F. It is suitable for use on painted and unpainted surfaces of airframe structures.

Ardrox AV 8 Corrosion Inhibiting Compound is typically applied as a coating to protect metals commonly used in airframe structures and in aerospace components from corrosion. AV 8 can be used in all areas of the airframe on painted and unpainted surfaces. It combines good penetration properties with excellent corrosion inhibiting characteristics and a low applied film weight.

In areas exposed to severe corrosion conditions AV 8 should be over coated with AV 100D – a heavy duty, waxy, firm film CIC. Movable parts should be masked before treatment unless spray application can be controlled to prevent direct contact. If AV 8 spray control or masking of movable components is not possible, then an alternative, soft waxy film CIC, such as AV 25 should be used.